MTC-20/2S User Manual
_______________________________________________________________________________________________________________
4. Grounding
To avoid ground loops, the internal ground of the system is floating, i.e. it is not connected to
the protective earth of the mains while the cabinet is always connected to protective earth
(green / yellow wire). The system can be grounded either via a BNC cable connected to
INPUT or OUTPUT (10 mV / °C) or via the blue OUTPUT (= GND) connector.
5. Connection of the Sensor / DIN Connector
Figure 2: How to connect the temperature sensor (non DIN cable)
Figure 3: Connector pinout of the DIN connector (pins 1 and 3 are connected internally)
___________________________________________________________________________
version 2.7
page 11