DPA-2FX User Manual
___________________________________________________________________________
___________________________________________________________________________
version 1.8
page 11
5. Technical Data
DPA-2FX
Input range:
±12 V; protected up to 15 V
Input impedance:
10 M
, related to ground
Input capacitance:
30 pF
AC coupling at input:
corner frequency of 0.1 Hz (if AC / 0 / DC-switch at BNC connector
is switched to AC)
OFFSET compensation: set by ten-turn potentiometer, range
0.1, ±1 V or ±10 V set by
toggle switch
HIGHPASS Filter:
single pole, attenuation: -6 dB / octave, corner frequencies (Hz): 3,
30, 100, 300, 400, 500, 600, 800, 1k, 3k, 10k
LOWPASS Filter:
single pole, attenuation: -6 dB/octave, corner frequencies (Hz): 30,
100, 300, 500, 700, 900, 1.3k, 1.5k, 1.7k, 3k, 10k, 20k
GAIN: rotary-switch
1-2-5-10-20-50-100
GAIN range:
selectable with rotary switch x1, x10, x100
Overload LEDs:
starting to light up at ±10 V
Output:
range: ±12 V into 1 k
/ ±1 V into 50
Size:
front panel 12 HP (60.6 mm) x 3U (128,5 mm), 7” (175 mm) deep
EPMS-07 SYSTEM
Power requirements:
115/230 V AC, 60/50 Hz, fuse 2 A / 1 A, slow, 45-60 W (dependent
on the modules plugged in)
Dimensions:
19” rackmount cabinet, 3U high (1U = 1 ¾” = 44.45 mm)
