-
Never throw batteries into an open fire or expose them to high temperatures.
-
Failure to observe these guidelines may cause fluid to escape from the battery,
which can cause skin irritation.
In case of contact:
-
Wash off the fluid with plenty of clear water
-
Do to rub your eyes. Instead, rise eyes with plenty of water for 10minutes and seek
immediate medical attention.
-
Only use batteries of the same or an equivalent type. Explosion hazard.
-
Remote the batteries from the battery compartment as soon as they are empty, or
if you do not intend to use the device for a long period of time.
-
If the battery compartment does not close securely, stop using the product and
attention should be drawn to the environmental aspects of battery disposal.
4.
Getting Started
The items enclosed in the packaging box are as follows:
•
A120+ unit
•
Power adaptor
•
Remote control
•
RCA Audio cable(RCA to RCA)
•
FM/DAB pigtail antenna
•
User manual
Connect the FM antenna and WiFi antenna to the back of A120+.
And connect the RCA audio cable to the Line out jacks of A120+ and your own speaker.
Then connect the power adaptor to the back of A120+ and plug it into power socket. (Turn on
your own speaker if need audio out.)
Get the network environment ready
•
For wired Ethernet
Use an Ethernet cable (RJ45 jack) to connect the LAN ports on A120+ and your network
device. Check if the light indicators on the network device are in appropriate status.
•
For wireless WiFi
Make sure you have setup the wireless network and you have the WEP, WPA or WPA2
security password to activate the connection.
You may also use the WPS (WiFi Protected Setup) function for easy pairing between the
network device and A120+. Check if the light indicators on the network device are in
appropriate status.
Switch it on from A120+.
