and loudness settings.
Press
EQ
on the remote control to quick enter equalizer menu.
5.2.3
Network
•
Network wizard
Enter to search AP SSID, then input the WEP / WPA key or choose
Push Button/Pin/Skip WPS to connect to the wireless network.
•
PBC Wlan setup
Push Button Configuration, it is to connect the AP that supports WPS
(Wi
-
Fi Protected Setup).
•
View settings
View the information of current connected network: Active
connection, MAC address, Wlan region, DHCP, SSID, IP address, Subnet
mask, Gateway address, Primary DNS and Secondary DNS.
•
Wlan region
Select the Wlan region to obtain the optimal Wlan connectivity:
Canada, Spain, France, Japan, Singapore, Australia, and Republic of Korea.
•
Manual settings
Choose wired or wireless network connection and enable or disable
DHCP (Dynamic Host Configuration Protocol).
•
Network profile
A120+ remembers the last four wireless networks it has connected to,
and automatically tries to connect to whichever one of them it can find.
From here you can see the list of registered networks. You can delete
unwanted networks by turning and pressing
then choosing YES
to confirm delete.
•
Keep network connected
If you choose to keep network connected, the WiFi will not disconnect even you are
in standby mode. Otherwise, the connection will only available. This option allows
A120+
to be ready for DLNA streaming in any operating modes. Details for DLNA
streaming, refer to Section 5.6.
