Nowsonic AUTARK LED MASTER II, Руководство пользователя

Страница: 9 / 56

9
Nowsonic Autark LED Master II
User manual
GB
www.nowsonic.com
6. 1–10, 11–20, 21–30 and 31–40 buttons
Using the
1–10, 11–20, 21–30
and
31–40
buttons you can choose
the desired channel group which is then controlled via the R, G, B and
W/D faders: thus, 40 channels in total can be controlled. The
LED
s next
to the buttons show the current selection.
7.
CHANNEL MODE
button
You can choose the desired channel mode for the faders R, G, B
and W/D via the CHANNEL MODE button ( 1 ): the active selection
is shown via the
LED
s above the buttons. You can choose from the
following six modes:
8.
RUN MODE
button
By pressing the RUN MODE button you can choose whether the
program which you have selected via the MAC fader ( 3 ) is controlled
automatically or via the music sensitivity. Depending on the selection,
the
LED
AUTO or SOUND lights.
9.
BLACK OUT
button
Press the BLACK OUT button to set all channel values temporarily to
0: this means that all controlled slave units are idle (not lit) as long as
you hold this button pressed.
10.
STROBE
button
Press this button to activate the Strobe mode: the Strobe effect is
active as long as you hold the button pressed. When the Strobe mode
is active, you can control the Strobe speed via the
STROBE SPEED
/
Sensitivity
fader ( 5 ) in the range from 1 to 20Hz.
Cabling
The
LED
Master
II
allows to control external slave devices via up to 40
channels. Connect the devices as follows:
1)
Using the supplied wall power supply, connect the
LED
Master
II
to the mains power and switch the unit on.
2)
Connect a standard high quality
XLR
audio cable (not supplied)
to the
DMX
out socket (female) of the
LED
Master
II
.
LED Channel mode Mode description
M1 RGB Channel 1 = red, channel 2 = green, channel 3 = blue
M2 RGBD
Channel 1 = red, channel 2 = green, channel 3 = blue,
channel 4 = dimmer
M3
RGBW
Channel 1 = red, channel 2 = green, channel 3 = blue,
channel 4 = white
M4
RGBWD
Channel 1 = red, channel 2 = green, channel 3 = blue,
channel 4 = white, channel 5 = dimmer
M5 DRGB
Channel 1 = dimmer, channel 2 = red, channel 3 =
green, channel 4 = blue
M6 DRGBW
Channel 1 = dimmer, channel 2 = red, channel 3 =
green, channel 4 = blue, channel 5 = white