Now Technologies GyroSet Cubo, Руководство пользователя

Страница: 29 / 39

Emergency stop/Leave driving mode:
Push the Headrest Sensor with the back of the head with a fast (faster than reversing)
movement. The chair will react immediately to the push of the sensor.
The chair stops also when the head leaves the range set in the Glory Tools application and also
when the user is making fast, seizure-like movements.
Enter the Omni menu:
When the driving mode is inactive, use a face-wink gesture to enter the menu of the Omni.
To be able to navigate in the menu, the head drive needs to be in active mode, please use the
Headrest Sensor to activate navigation in the menu.
WARNING Please do not leave the Omni menu by the Exit option in the menu as this
will cause you immediately driving the chair. Instead, deactivate the menu navigation
first by using the Headrest Sensor and then switch to drive mode with a face-wink to
continue driving.
Resting:
Tap the Headrest Sensor quickly with the back of the head with a fast movement and hold your
head on it for at least 5 seconds. That will enable you to rest your head without the risk of
accidentally starting to drive.
Drive with your Vigo
1. Imagine that your head is like a regular joystick.
2. Tilt your head (make sure not to turn as it has no effect) to the direction you wish to go.
The tilt amount is proportional to the speed of the wheelchair’s movement. Make slow,
fluid and small movements with your head to avoid activating the emergency stop.
3. To come to a halt, move your head into the neutral position (into the dead-zone)
4. To stop driving press the Headrest Sensor.
For each drive session, a new neutral position can be selected, this helps in case the user
changed their posture.