Now Technologies GyroSet Cubo, Руководство пользователя

Страница: 19 / 39

● The GyroSet Cubo must be properly connected to GyroSet Link and the Headrest
Sensor.
● The GyroSet Cubo Micro-USB and the headrest’s cable must be tied to the frame
of the wheelchair to avoid accidental tearing or crushing by the movement of
actuators.
● The GyroSet Cubo Micro-USB and the headrest’s cable placement has to be
designed so that cables are protected during accidental crashes if the wheelchair
hits an obstacle.
Headrest and Headrest Sensor
For safety reasons we strongly recommend using the Headrest Sensor as it has been
designed to fulfil both emergency stop and drive start functions while enabling the users
to rest their head while not driving.
Jack connector on Cubo
Jack connector is the interface for connecting auxiliary buttons and sensors to the system. The
route of the signal coming from the button can be redirected to be processed by either the Cubo
itself or by the Link. By default the signal is processed by the Link.
● The Link as receiver is compatible strictly with sensors and buddy buttons manufactured
by Now Technologies Ltd. - such as the Headrest Sensor.
● In case the Cubo is set to receive Jack signals any kind of Now Technologies or third
party buddy button can be used.
How to place the Headrest Sensor on the wheelchair