Novus NVR-5404POE, Руководство пользователя

Страница: 5 / 40

NVR-5404POE User’s manual (Short) ver.1.1
All rights reserved © AAT Holding sp. z o.o.
5
STARTING THE DEVICE
2. STARTING THE DEVICE
2.1 Electrical connection and other rear panel elements.
1.
DC 48V: 48 VDC PoE power supply socket
2. IPC1...IPC4 : 4 x RJ-45 connections ports with PoE support
3. LAN: RJ-45 connector port for connecting to the local network and interne
4. A-OUT/SP: Port for connecting local speaker with pre-amplifier.
5. VGA: Main monitor connectors, use the D-SUB VGA cable to connect monitor.
6. 1080P (HDMI): Main monitor connectors, use the HDMI cable to connect monitor.
7. USB: 1 x USB 2.0 port for external Flash memory, mouse connection and other
USB compatible devices.
8. RS-485 RS-485 interface
9. 1...4 IPC1 to IPC4 ports status LED-s
10. POWER SW: NVR power switch, plug the power cord and turn this switch on.
11. A-IN/MIC: Audio mono inputs for connecting microphones*.
* For future usage
2.2 HDD mounting
Novus NVR support 1 internal SATA HDD.
WARNING!
In order to find information regarding the compatible models of HDDs and their maximum
capacities, please contact Novus distributor or check the information presented at
www.novuscctv.com. AAT HOLDING Company is not responsible for any problems resulting
from using not recommended hard drives.
The list of compatible HDDs contains all the HDDs that can be used with a given DVR including
HDDs designed for office use - so called desktop disks. However, due to the fact that reliability of
the recording process and data safety are paramount factors of any CCTV system, we strongly
advise to use HDDs designed for continuous (24/7) operation.
You need to format disks to if they were used in a different device. All data saved on HDD prior
to format will be lost .
1
11 10
9
2
3
4 5
6 7 8