NVR
-
4416P16
-
H2/F User’s manual (short) ver.1.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
13
3. NVR OPERATING
3.1. Control
NVR
-
4416P16
-
H2/F recorder can be controlled using IR remote controller or USB mouse.
3.1.1. Controlling via IR remote controller
IR remote controller is included with DVR. IR range depends on battery status and may vary between a few and
several meters.
Controller is supplied with two AAA batteries. Buttons functions are listed below.
3.1.2. Controlling via USB mouse
It is possible to control NVR functions using an USB mouse. Double
-
clicking on any camera in
division mode switches the display to full
-
screen mode. Another double
-
click returns to previous
display mode. Move cursor to the bottom of the screen to display menu bar. Press left mouse button on
the channel video to display channel menu. Certain positions allow to select them via mouse scroll.
Depending on NVR operating mode, right mouse button leaves menu.
NVR OPERATING
0
-
9
Numeric buttons for channel selection. Channel 10 and another
can be selected using buttons combination. i.e. to open channel
15 press „1” and then „5”.
ALL
Toggles between different display formats: 1, 4, 9, etc.
MENU
Enters to main menu. Pressing this button cancel the selection
and leaving the menu also.
SUBMENU
In live mode open the Popup menu.
Navigation control „left”, „right”. In live mode open the Popup
menu.
Navigation control „up” , „down”.
SEL
Button is used for confirm the selection and start to editing
fields. In live mode open the Popup menu.
Switch on playback mode. Open Record Search menu. In live
mode open the Popup menu.
Slow down playback speed.
Fast up playback speed.
Turn on manual record.
Playback pause, press again to play frame by frame.
Stop the playback. In live mode stop the manual recording.
