Novus NVIP-9DN2018V/IR-1P, Руководство пользователя

Страница: 18 / 40

NVIP-9DN2018V/IR-1P - User’s manual (short) ver 1.1
All rights reserved © AAT Holding S.A.
18
ELECTRIC CONNECTORS AND RESTORING FACTORY DEFAULTS
8. Live Preview window.
Double - clicking on the live view window enables the display of the image on the full screen.
Additionally, depending on the display mode selected previously (see point 1), it is possible to modify
the display method: rotation, selection of the field of view, zooming (virtual PTZ). These operations are
carried out using the mouse, by pressing and holding the left key and dragging the mouse.
5. ELECTRIC CONNECTORS
5.1. Connecting of the alarm input.
5.1. Connecting of the alarm output.
6. RESTORING FACTORY DEFAULTS
6.1. Software restore to factory defaults
Camera NVIP - 9DN2018V/IR - 1P allows you to reset your settings to the factory values. To restore the
camera settings to the default, go to the "Load Default" tab (Remote Setting - > Advanced - > Load
Default). Then select options and functions of the camera whose settings are to be reset and press the
"Save" button.
After about 30 seconds, you can reconnect to the camera (at the current IP address, as long as it was not
reset network settings or on the default IP address).
Note: To make a software restore factory settings, you must be logged in as "root".
6.2 Hardware restore to factory defaults
You can use the RESET button located on the camera cable to reset the camera's settings. To reset the
defaults using the RESET button, press and hold for about 5 seconds.
After about 30 seconds, you will be able to reconnect to the camera at the default IP address.
Trigger contact
signaling device
Max. load 0.3A
signaling device power supply
12VDC or 24VAC max.