Novus NVIP-9DN2018V/IR-1P, Руководство пользователя

Страница: 10 / 40

NVIP-9DN2018V/IR-1P - User’s manual (short) ver 1.1
All rights reserved © AAT Holding S.A.
10
START - UP AND INITIAL IP CAMERA CONFIGURATION
2.4.
Camera mounting
To mount a camera please follow the instructions below:

Put mounting drawing paper to the wall or ceiling and mark drill holes.

Drill holes for screws and for video and power cables.

Connect the base with the camera position adjustment element as shown in the picture

Using mounting screws from the package, attach the base of camera to the ceiling/wall

Put video and power cables through a base of camera and a previously drilled hole in the wall/
ceiling.

Push the camera to the base and then turn to the left to snap the camera into the base
WARNING!
Please note that the wall or ceiling must have enough strength to support the IP Camera.
WARNING!
In order to obtain declared degree of protection please seal the camera bracket to prevent water
getting inside. Furthermore, when installing the bracket on rough/uneven surfaces, please
additionally seal the junction with appropriate sealing mass. Please pay special attention to any
mounting holes and if they are a loop
- through ones, seal them too.
WARNING!
The declared degree of protection of the camera relates to its housing and does not take into
account the possibility of moisture infiltration into the interior of the camera by connecting
cables. Connection cables protection through i.e. sealing up is the responsibility of the camera
installer. The manufacturer is not liable for any damages to the camera caused as a result of
failing in performing that activity by installer, which also means that camera damaged in that
way is not subject to warranty repairs.