NVIP-3DN3050H/IR-1P, NVIP-3DN3051H/IR-1P, NVIP-3DN3052H/IR-1P - User’s manual
(short form) ver 1.0.
All rights reserved © AAT Holding sp. z o.o.
18
REMOTE PREVIEW
Alarm output
Camera alarm output is an relay output type.
•
Alarm output electric connections
5.4 SD card installation
Function available only for camera NVIP-3DN3052H/IR-1P
Camera supports SD/SDHC cards up to a maximum size of 64GB. In order to install the card properly,
please follow the instructions below:
•
Turn the camera off
•
Unscrew the service compartment screw and open the service compartment
•
Mount SD card, according to the picture:
•
Close service compartment and firmly screw the service compartment screw
•
Turn the camera on
•
Check the SD card by checking its capacity in the “System Config” -> “SD Card”
tab.
Alarm
Output (-)
Alarm COM
Alarm
Output (+)
Alarm NO
Indicator
power
supply
Indicator
IP Camera
Service compartment
SD card slot
