NVIP-3DN3012V/IR-1P, NVIP-3DN3013V/IR-1P, NVIP-3DN3014V/IR-1P - User’s manual
(short form) ver 1.0
All rights reserved © AAT Holding sp. z o.o.
8
START-UP AND INITIAL IP CAMERA CONFIGURATION
CAUTION!
If the device was brought from a location with lower temperature, please wait until it reaches
the temperature of location it is currently in. Turning the device on immediately after bringing it
from a location with lower ambient temperature is forbidden, as the condensing water vapour
may cause short-circuits and damage the device as a result.
Before starting the device familiarize yourself with the description and the role of particular
inputs, outputs and adjusting elements that the device is equipped with.
2. START-UP AND INITIAL IP CAMERA CONFIGURATION
2.1 View of the camera, layout of the camera items
1. Power supply 12VDC
2. 100 Mb/s Ethernet port (RJ-45 hermetic connector)
1.Locking screw
2. Light sensor
3. IR LED
1
2
3
1
2
