NVIP-3DN3012V/IR-1P, NVIP-3DN3013V/IR-1P, NVIP-3DN3014V/IR-1P - User’s manual
(short form) ver 1.0
All rights reserved © AAT Holding sp. z o.o.
10
2.2. Connecting ethernet cable
To maintain tightness of ethernet cable connection, please follow instruction below:
1. Loosen the nut (a) from the main element (b).
2. Run power cable (without RJ-45 connector) though both elements. Then crimp the cable with RJ-45
connector.
3. Connect the cable to the hermetic connector (c), screw main cover (b), then screw the nut (a).
WARNING! 12VDC power connector is not hermetic. User should seal power connector by himself.
START-UP AND INITIAL IP CAMERA CONFIGURATION
a
b
a
b
c
