Novus NVIP-2DN5002V/IRH-1P, Руководство пользователя

Страница: 11 / 44

NVIP-2DN5002V/IRH- 1P User’s manual ver.1.0
(short form)
All rights reserved © AAT Holding S.A.
11
4. To adjust the viewing angle power up the camera. Connect to the camera using a web browser
(see the chapter 2.4 for details ) or you can insert the included BNC test cable into video test cable
terminals and connect to a test monitor .
Caution : Make sure to follow the correct polarity if connecting the camera to DC power. Polarity is
marked on the power connector.
Note :Use the included RJ45 coupler to connect to male end of RJ45 Ethernet cable.
Loosen the screws on the sides of the and adjust the ball camera. Do not remove the screws holding the
ball camera. Tighten the screws when finished.
Note : Ensure the ball camera is pointed in the same direction as the IR LED to ensure a good night
time image.
START-UP AND INITIAL CAMERA CONFIGURATION
Video test cable
Loosen screws to adjust the angle
of the camera ball
IR LED