NVIP-2DN5001D/IR-1P, NVIP-3DN5001D/IR-1P, NVIP-5DN5001D/IR-
1P User’s manual
(short form) ver.1.0
All rights reserved © AAT Holding sp. z o.o.
20
Alarm output
Camera alarm output is an relay output type.
Alarm output relay maximum load: 12 VDC / 300mA.
Alarm output electric connections
5.4 SD card installation
Camera supports microSD/SDHC cards up to a maximum size of 64GB. SanDisk™ or Kingston™
brand microSD/SDHC cards are recommended. In order to install the card properly, please follow the
instructions below:
Turn the camera off
Press down on the tab marked with an arrow to lift up the dome cover slightly. While pressing on
tab, twist the dome cover counter clockwise just a few degrees to release dome cover from back
clips. Lift off the cover.
Mount SD card in the socket located at the camera’s base, according to the picture:
Re-attach the camera cover, until it snaps into place.
Turn the camera on
Check the SD card by checking its capacity in the
Local Record -> Record Directory
tab
.
ELECTRIC CONNECTORS AND ACCESORIES
Alarm
Output (-)
Alarm COM1
(purple)
Alarm
Output (+)
Alarm OUT1
(grey)
Indicator
power
supply
Indicator
IP Camera
SD card slot
