Novus NVIP-2ATM-4401, Руководство пользователя

Страница: 9 / 32

NVIP-2ATM-4401 - User’s manual (short form) ver 1.0
All rights reserved © AAT Holding S.A.
9
START-UP AND INITIAL CAMERA CONFIGURATION

Connection directly to the computer using external power supply
2.4. Initial configuration via the web browser
The default network settings for camera are:
1. IP address=
192.168.1.200
2. Network mask - 255.255.255.0
3. Gateway - 192.168.1.1
4. User name - root
5. Password - pass
Knowing the camera
’ s IP address, appropriately set PC IP address, so the two devices can operate in
one network subnet ( e.g. for IP 192.168.1.1, appropriate address for the camera ranges from
192.168.1.2 to 192.168.1.254, for example 192.168.1.60). It is not allowed to set the same addresses for
camera and PC computer
Either set a network configuration (IP address, gateway, net mask, etc.) of NOVUS IP camera yourself
or select DHCP mode (DHCP server is required in this method in target network) by using web
browser or by NMS software. When use DHCP server, check IP address lease and its linking with
camera MAC address to avoid changing or losing IP address during device operation or network/DHCP
server breakdown. Remember to use a new camera IP address after changing network parameters.
After network setting configuration has been done, the camera can be connected to a target network.
Network transmission - cross over cable
Computer
IP Camera
Power supply