All rights reserved © AAT Holding S.A.
NHDR-xxxxAHD, NHDR-xxxxAHD-II
User's manual ver. 1.2
30
DVR MAIN MENU
Post Recording -
after the alarm finishes, the duration time of the alarm recording can be set as 30
seconds, 1 minute, 2 minutes and 5 minutes.
Alarm Out -
when moving object is detected, switch on the alarm output relay.
Latch Time -
alarm output relay latch time: 10 seconds, 20 seconds, 40 seconds and 60 seconds.
Show Message -
“
M”
icon will be displayed on the screen when moving object is detected and alarm
is made. Red icon means that motion is detected and video is recorded. Green icon means that motion
is detected but video isn’t recorded.
Send Email -
When moving object is detected, send Email to the specified Email address.
Full Screen -
When moving object is detected, selected video channel will be displayed in full screen.
Record Channel -
When moving object is detected, record the selected video channels (depends on motion
recording schedule).
Copy -
Copy the parameters from selected channel to any other channel or all channels.
2.1.5.2. Alarm Inputs
Submenu allows to manage the alarm reaction in different conditions.
Channel -
select the alarm input channel from the drop-down list.
IO Status
- allows for setting the alarm output either as normal closed
—
activated by low state,
normal open - activated by high state, or turned off.
Alarm Out -
when alarm is detected, switch on the alarm output relay.
Latch Time -
alarm output relay latch time: 10 seconds, 20 seconds, 40 seconds and 60 seconds.
