Novus N20K48, Руководство пользователя, Страница: 26 / 57

NOVUS AUTOMATION
26/57
The display assumes the lower limit value when the input signal is lower than 1% of its excursion.
Parameter available for
linear inputs (see table in ANALOGIC INPUT CONFIGURATION section).
Table 9 – Input cycle
4.3.5 OUTPUT A CYCLE (
CFG
>>
out.A
)
This is the Output A Cycle:
Output A Cycle
Fu.oA
Fu nction o utput A
Allows you to define the output A function:
oFF
– No function
MV1
– Output will act as control output 1
MV2
– Output will act as control output 2
A1
– Output will act as alarm output 1
A2
– Output will act as alarm output 2
A3
– Output will act as alarm output 3
A4
– Output will act as alarm output 4
T1
– Output will act as timer output 1
T2
– Output will act as timer output 2
M.Coil
– Output will act as a Modbus-Coil command for connection to the Modbus-TCP protocol
Table 10 – Output A Cycle
4.3.6 OUTPUT B CYCLE (
CFG
>>
out.B
)
This is the Output B Cycle:
Output B cycle
Fu.oB
Fu nction o utput B
Allows you to define the output B function:
oFF
– No function
MV1
– Output will act as control output 1
MV2
– Output will act as control output 2
A1
– Output will act as alarm output 1
A2
– Output will act as alarm output 2
A3
– Output will act as alarm output 3
A4
– Output will act as alarm output 4
T1
– Output will act as timer output 1
T2
– Output will act as timer output 2
M.Coil
– Output will act as a Modbus-Coil command for connection to the Modbus-TCP protocol
Table 11 – Output B function