NOVUS AUTOMATION
39/53
•
Log Status:
Displays information about the logs status, such as the number of recorded logs, the available memory, the number of active
channels, and the date of the first and last log in the
LogBox Wi-Fi
memory.
•
Log Control:
Allows you to start or pause
LogBox Wi-Fi
data logging. In order for this option to be active, the "By Software" parameter must
be enabled in start and/or end of log mode.
11.2.2
CHANNELS
Fig. 14
– Diagnostics Screen: Channels
•
Analog Channels and Digital Channel:
Displays information about the acquisitions made by the device on the analog channel sensors and
on the digital channel sensor.
o
Last Read Value:
Displays the value of the last acquisition performed by the device on the corresponding channel sensor. The displayed
value may have been updated by a display update frequency and not logged in the memory.
o
Minimum Read Value:
Displays the minimum red value by the device on the corresponding channel sensor. The displayed value may
have been read by a display update frequency and not logged in the memory.
o
Maximum Read Value:
Displays the maximum value read by the device on the corresponding channel sensor. The displayed value may
have been read by a display update frequency and not logged in the memory.
o
Minimum Alarm Status:
Displays the configured minimum alarm Setpoint information and informs if the device has entered a minimum
alarm condition on the corresponding channel. The alarm may have been detected by a display update frequency and not logged in the
memory.
o
Maximum Alarm Status:
Displays the configured maximum alarm Setpoint information and informs whether the device has entered the
maximum alarm condition on the corresponding channel. The alarm may have been detected by a display update frequency and not
logged in the memory.
11.2.3
MISCELLANEOUS
Fig. 15
– Diagnostics Screen: Miscellaneous
•
Power:
Displays the device’s power information.
o
Power Supply:
Displays the current power supply of the device.
o
Battery Level:
Displays the current battery level status. This information is updated in the logs frequency with a minimum frequency of 5
minutes.
o
External Power Supply Voltage:
Displays the external power supply voltage of the device. This information is updated in the logs
frequency with a minimum frequency of 5 minutes.