LogBox-RHT-LCD
NOVUS AUTOMATION
5/6
7.3.4
FINALIZATION
Figure 9 –
Finalization
CONFIGURATION
•
Send Configurations:
Allows you to send the configuration to
the device.
•
Save to File:
Allows you to save the configuration to a file that
can later be used.
•
Memory Download:
Allows you to download logs from memory.
LOG CONTROL
•
Start or Resume:
Allows you to start or resume logs that have
been interrupted by the
Pause
command, without discarding
logs that are in the device's memory, using the configured
parameters.
•
Pause:
Allows you to stop logs, allowing them to be resumed in
the future using the
Start
button.
•
Stop:
Allows you to permanently stop logs, so that the device
will only re-register when it receives a new configuration.
7.4
DOWNLOADING AND DATA VISUALIZATION
Data downloaded are send from device to PC.
Data can be downloaded any time: at the end of the registering
process or while they are being acquired. If data download takes
place during the registering process,
the process will not be
interrupted
, following the device configuration.
7.4.1
DOWNLOADING DATA
Data download is accomplished by clicking the button
Download
Logs
in the
Download
screen from
NXperience
.
During data transference, a status bar indicates remaining data to
be transferred. Data downloading time is proportional to the number
of readings logged.
7.4.2
VISUALIZING DATA
At the end of values transfer, the data will be displayed in a
graphical form.
CHART WINDOW
It is possible to select a region of the chart to zoom in. Zoom
commands can be accessed through zoom icons from the task bar.
It is also possible to select an area from the chart to zoom in by
clicking and dragging the mouse, thus creating a zoom region
starting from the upper left corner on the chart area.
The graphic curves can be vertically dragged with a right-click and
dragging the mouse up and down.
Figure 10 –
NXperience
chart window
DATA VIEW TABLE
Values are presented in a tabular form, listing the measurement
time and value.
Figure 11 –
Data view
GENERAL INFORMATION
In addition to the configuration you have made, this window shows
general information about the device whose data has just been
read:
Figure 12 –
General information
