NOVUS AUTOMATION
9/9
6.6.2
Measures Table Window
To display measurements in a tabular form, press the icon Table
View:
Values are presented in a tabular form, listing the measurement time
and value.
Fig. 26 – Measurement table
In equipment with digital input, will be displayed the digital input
events in the same table as the temperature data and will be
considered "acquisitions" for display purposes.
6.6.3
General information table
This window shows some information about the equipment whose
data were just read and its configuration. The screen can be
displayed by pressing the icon Parameter Viewing:
Fig. 27 – General information
6.7
Exporting data
Logged data can be exported to different file formats, for further
analysis. To export, access File/Export or click the icon:
6.8
Diagnostic Screen
Battery Level: Indicates the level of battery voltage.
When you observe that the battery level is low, replace it immediately
for proper device operation:
Device Status: Summarizes the state of the device, including its
memory, and the occurrence of alarm events to the time of the
opening of the Diagnostic page.
7
AVAILABLE MODELS
•
Sensor with cable 30 cm;
•
Sensor with 1 m cable;
•
Sensor with 30 cm cable and digital input (1 m cable).
8
WARRANTY
Warranty conditions are available on our web site
