Novus 2000 IP series, Руководство пользователя

Страница: 28 / 66

IP 2000 series camera - user manual ver. 1.0.
All rights reserved © AAT Holding S.A.
28
5.8.2. „Line Crossing” Menu
The menu allows to configure up to four lines of detection. An alarm event is generated when object
crossing determined line, and its movement is carried out in a direction specific in the settings.
Configuring the parameters of detection line
In the line options should be specified the duration of the alarm, the duration of the recording after the
event (
Post recording ), sensitivity and type of scene ( Indoor, Outdoor ). The last two options are used
to configure the operation of analysis algorithms to ensure the least amount of false alarms. In the next
step, select the type of alarm event (
Enable I/O Out
*
, Send Email , Record
*
), select the number of
line to be set, set the type of action (ie, the direction of motion, which will trigger an alarm event) and
activate the line.
Drawing a line
To draw a line of detection, click the left mouse button on the preview window to the desired location
and while holding down the button, drag the mouse. In the place where you want to end the line release
the button. In the same way are drawn all the necessary lines of detection.
WWW INTERFACE - WORKING WITH CAMERA
*
option active for the cameras with alarm inputs/outputs and/or the option to write to the
memory card
If you need to create several lines of detection, they can cross each other.