Novus 2000 IP series, Руководство пользователя

Страница: 25 / 66

IP 2000 series camera - user manual ver. 1.0.
All rights reserved © AAT Holding S.A.
25
5.7. A group of settings „Advanced”
This menu allows to manage advanced settings of the camera.
5.7.1. ”Firmware Update” Menu
This tab allows to update the system software of the camera.
- Prior to the update, restore the factory settings (selected option All - see point: 5.7.2 "Load
Default" Menu - you may not reset the network settings) and wait for restarting the camera
- After selecting the path to the file with the new firmware, press the Upgrade button and wait for
the camera restart
- After the update connect with the camera, install the new version of ActiveX (if necessary), and
then restore the factory settings again
- After restarting the camera, you may configure it according to your needs.
5.7.2. „Load Default” Menu
This tab allows to reset the camera settings to default values.
It is possible to select specific groups of settings to reset according to your preferences, by checking the
boxes at the appropriate positions. You can also use the predefined reset settings by using the buttons
Simple (resets some settings) or All (resets all settings, leaving the choice in the position Network ).
Restoring the factory settings is started by pressing the Save button.
5.7.3. „Maintain” Menu
This tab allows to configure options of regular reboot the camera. There is also a Reboot button that
allows immediate restart the camera. For a reboot is necessary to enter the user's password (if the user
has disabled the password - prompt will not appear.)
WWW INTERFACE - WORKING WITH CAMERA
During the update, do not disconnect the power supply or close or refresh your browser window
under the threat of the risk of irreversible damage to the camera.