background image

 

Development and manufacturing of 

non-destructive control units and 

system 

 

Dew Point Meter NOVOTEST KTR-1 

9

 

 

Surfaces  with  surface  temperature  near  or  below  the  dew  point 
temperature will be covered by condensate.  
 
8.5

. ΔТ  

ΔT  -  is  the  difference  between  the  surface  temperature  of  tested 
objects and the dew point temperature.  
 
8.6. The warning signal 
Devices  makes  sound  alarm  when 

ΔT  (difference  between  surface 

temperature  and  dew  point) 

decreases  more  than  3  °  C.  In  such 

climatic conditions there is a risk of poor-quality painting, due to the 
formation of condensation on the surface. A warning signal sounds 
only  in  the  mode  of  displaying  difference  between  the  surface 
temperature and the temperature at point.  

 
9. Storage and transportation 

9.1. The Device must be stored at ambient temperature from  -10 to 
+35 

° C and relative humidity up to 80% at 25 ° C. 

 
9.2.  The  storage  should  be  free  of  dust,  fumes,  acids,  alkalis  and 
corrosive gases. 
 
9.3. Transporting device in a package can be made by any mode of 
transport  in  accordance  to  the  requirements  and  rules  of 
transportation, operating on the data types of transport. 
 
9.4. During transportation, handling and storage of stock unit should 
be kept from blows, shocks and moisture. 

 

 
 
 

Содержание KTR-1











Отзывы: