novocure Optune NovoTTF 200A, Руководство пользователя

Страница: 35 / 64

27
There are two ways to unplug from the device to take a break from treatment (after
turning off the device):
1. Unplug the connection cable from the device.
2. Unplug the transducer arrays from the connection cable.
To unplug the connection cable from the device:
Stop treatment by pressing the TTFields button. Turn off the device using the power
button.
Unplug the connection cable from the socket by holding the sleeve and pulling. Do not
pull on the cord.
You may now move around without the device, but you will still be connected to the
connection cable and box. To start treatment again after your break:
1. Plug the connection cable into the connection cable socket with the arrow
pointing up.
2. Turn on the device using the power button. Wait for self-check to be completed
(about 10 seconds).
3. Turn on the TTFields using the TTFields button.