novocure Optune NovoTTF 200A, Руководство пользователя

Страница: 32 / 64

24
16
Using the Power Supply
When you plan to stay in one place for a while, like when you are sleeping, you may
use the plug-in power supply instead of the batteries. Unlike the batteries, there is no
limit to how long the device can work when you use the plug-in power supply. The
plug-in power supply will work with either U.S. (120V AC) or European (230V AC)
outlets.
Note: It is normal for the power supply to become warm when in use. If the power
supply becomes too hot to touch, unplug it and contact technical support (Section 16).
When the power supply is plugged in, the device will utilize the power supply as the
preferred power source. If it is running, it will automatically switch from battery power
to power supply power.
Connecting the Plug-In Power Supply
1. Plug in the power supply to a standard wall outlet using the power cord that
comes with the system.
2. You do not need to remove the battery from the device to use the plug in
power supply. Please note that a battery in the device will not charge when
plugged into the plug in power supply. Depleted batteries must be placed on
the battery charger to re-charge. If the TTFields are activated you do not need
to turn them off to plug in the power supply.
3. Plug the round connector of the plug-in power supply line into the round socket
AC port on the back of the device (next to the power button).
4. If the TTFields are running, the device will switch to power supply power
without interruption of the TTFields. If the device is not turned on, turn on the
power switch and wait for the self-check to be completed (about 10 seconds).
Push the TTFields button to start the device (as described in Section 6).
AC Port located next to the power button