SF200 Manual
SF200E-0160-01 REV 03
Diane Smith
4/15/13
Page 5 of 27
3.2 HDMI OUT
3.2.1
Connection from the SF-200 HDMI output to the monitor is
typically made using a HDMI to HDMI cable. If your monitor
does not have an HDMI input and has a DVI input, a HDMI
to DVI cable can be used.
Note:
For best results, the video cable should be less then 3M long.
3.3 Ethernet Port
3.3.1
Connection from the SF-200 to the local area network is
made through the Ethernet port (LAN)).
If you plan on using your SF-200 as a networked player you
will need to make the connection using an Ethernet (Cat-5)
cable.
3.3.2
By default, the SF-200 is set to get an IP Address using
DHCP. If the player cannot get a DHCP assigned address, it
will then use 192.168.0.190 as the default IP Address.
You can also Statically assign an IP Address.
(see the
Web App Configuration
section of this Manual)
You can also make arrangements with Noventri to customize
your SF-200 player’s IP Address for your network.
1-301-790-0103
www.noventri.com
