SF200 Manual
SF200E-0160-01 REV 03
Diane Smith
4/15/13
Page 16 of 27
5.1.2
So if the SF-200 has it’s DHCP mode enabled and an IP
address other than 192.168.0.190 is displayed, you know
you are connected to the Network.
-
If the IP Address displayed on the Grey Scale image
is 192.168.0.190, this means the SF-200 is not getting
a DHCP IP Address from your network.
-
192.168.0.190 is the default IP address that is
assigned to the SF-200 if there is no Network
connection, or if the Network is not configured to
assign DHCP IP Addresses.
-
If the IP Address is 192.168.0.190 and your Network
is setup to assign DHCP IP Addresses, you need to
check the network connection. A good way to check
for connectivity is to verify that the SF-200 LAN LED’s
are blinking.
Note:
Contact your Network Administrator or
Noventri, if you experience problems.
5.2
Network that is not setup for DHCP (does not automatically assign
IP Addresses).
5.2.1
The SF-200 default mode is DHCP enabled. So when
booted up and no IP address is assigned, it will time out and
default to 192.168.1.190.
-
First verify that only one SF-200 at a time is
connected to the Network with the default
192.168.0.190 IP Address.
Note:
If there is more than one SF-200 on the same
IP address this will cause IP conflicts and
make it difficult to configure Players.
-
Log into the SF-200 through it’s Web App and change
the SF-200 from DHCP to a Static IP Address
compatible with your Network.
(See the
Web App Configuration
section of this manual)
