10
Noventri Eco-Series User Guide
SF-100E-0160-01 REV 03
5.8.1 DHCP
– Checking the box will enable DHCP and the SF-100e will obtain an IP
address automatically. Unchecking the box will disable DHCP and the SF-100e
will use the default 192.168.0.190 IP Address.
Note: Make sure you have a way to determine your new DHCP IP Address.
This can be done by making sure your NOVENTRI SERVER IP is
specified before changing to DHCP.
•
Your router must have its DHCP Server enabled for this to work. If the
SF-100e does not receive a DHCP assigned IP Address, the SF-100e
will go back to its default 192.168.0.190 IP Address.
•
When DHCP is enabled, you no longer have the ability to change the IP
ADDRESS, NETMASK or GATEWAY. All the proper settings will be
assigned by the network.
•
When DHCP is enabled or disabled, you will have to apply these
changes by clicking the
SUBMIT
button. (This will take a moment.)
•
If you are unable to determine the IP Address of the SF-100e, the player
can be reset back to factory defaults. (see
Factory Defaults
section of
this Manual)
5.8.2 IP ADDRESS
– You can set a static IP ADDRESS for the SF-100e. If the IP
ADDRESS is changed, be sure you have the correct NETMASK and GATEWAY
filled in for your network.
•
For the new IP Address to be set, you will have to apply these changes
by clicking the
SUBMIT
button. (This will take a moment.)
•
If you are unable to determine the IP Address of the SF-100e, the player
can be reset back to factory defaults. (see
Factory Defaults
section of
this Manual)
5.8.3 NETMASK
– If you changed the IP ADDRESS, you will need to make sure the
NETMASK is correct for your network.
5.8.4 GATEWAY
– If you changed the IP ADDRESS, you will need to make sure the
GATEWAY is correct for your network.
5.8.5 DNS 1
– You will need to set the primary DNS for your network if you are not
using DHCP. You can use the GATEWAY IP Address as the DNS.
5.8.6 DNS 2
– The secondary DNS is set to 0.0.0.0 by default. If DNS 1 is using the
GATEWAY IP Address, DNS 2 can stay default.
5.8.7 NOVENTRI SERVER
– Tells the SF-100e on what IP Address and Port the
Noventri Server™
software is located on.
