Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5, Руководство по установке, Страница: 57 / 76

Endpoint Security Client 3.5 Installation 57
no
vd
ocx
(e
n)
17
Sep
te
m
be
r 20
09
Figure 8-3
User or Machine-based policies
7
Click Install .
After the software is installed, the user is prompted to restart the machine.
NOTE: You can optionally copy the certificate for the Management Service into a folder co-located
with
setup.exe
prior to running the installation. This automatically installs the certificate onto the
machine (for example, for all users). This process can also be done with the Novell license.
dat
file.
8.2 MSI Installation
This procedure creates a MSI Package for the Endpoint Security Client 3.5. This package is used by
a system administrator to publish the installation to a group of users via an Active Directory policy,
or through other software distribution methods.
To create the MSI package;:
If you are installing from the CD or ISO master installer and if you’re not planning to run any
command-line variables (see
Section 8.2.1, “Command-line Variables,” on page 60 ):
1
Insert the CD and wait for the master installer to launch.
2 Click Product Installation .
3
Click Security Client .
4 Click Create ZSC MSI Package .
If you are using just the
setup.exe
file for installation (the executable can be found on the CD
under
D:\ESM32\ZSC
), begin with the following:
1 Right-click
setup.exe
.
2 Select Create Shortcut .
3 Right-click the shortcut, then click Properties .
4 At the end of the Target field, after the quotes, click the space bar once, then type
/a
.