Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5, Руководство по установке, Страница: 29 / 76

Performing the Policy Distribution Service Installation 29
no
vd
ocx
(e
n)
17
Sep
te
m
be
r 20
09
4 Specify the Policy Distribution Service domain name. This must be the fully qualified domain
name if the server resides outside the corporate firewall. Otherwise, only the NETBIOS name
for the server is required.
Figure 5-4
Enter Policy Distribution Service Domain Name
5 At the Copy Files screen, click Next to begin the installation.
6 An
ESM Setup Files
folder is generated in the installation directory. This contains a
Setup
ID
file and the
ESM-DS.cer
file (Novell self-signing SSL certificate) required by the
Management Service. Copy this file directly onto the machine designated as the host for the
Management Service, either via a netshare or by saving the file to a disk or thumb drive and
hand-loading it onto the server installation directory.
7 The Policy Distribution Service is now installed, click Finish to close the installation program
to launch the performance monitor.
5.1.2 Custom Installation
A custom installation displays the defaults used in the typical installation and permits the
administrator to specify, or browse to, a different directory to place the software files.
The administrator can select either to install a Novell self-signed SSL certificate or use one of their
own.
1 An SSL Certificate is required for secure communication between the Policy Distribution
Service and the Management Service, and between the DS and all Novell Security Clients. If
you already have a certificate authority, click
Use the existing certificate IIS is configured for .
If you need a certificate, click Allow Novell to create, install, and use its own self-signed root
certificate . The installer creates the certificates and the signing authority. Regardless of the
certificate type, these certificates must be distributed to all users.