Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5, Руководство по установке, Страница: 49 / 76

Performing the Management Console Installation 49
no
vd
ocx
(e
n)
17
Sep
te
m
be
r 20
09
7.2 Starting the Console
To launch the Management Console login window, click Start > All Programs > Novell > ESM
Management Console > Management Console .
Log in to the Management Console by entering the administrator name and password. Before you
can enter the username and password, you must be connected to the directory service's domain (see
Section 7.2.1, “Adding eDirectory Services,” on page 49 ). The username must be a user on the
Management Service domain.
Figure 7-5
Login to ZENworks Endpoint Security Management Management Console
7.2.1 Adding eDirectory Services
The following steps provide information for using Novell eDirectory as the directory service. For
information about using Microsoft Active Directory, see “
Configuring the Directory Service ” in the
ZENworks Endpoint Security Management Administration Guide .
1 Click the Options button on the login screen to display the Configuration window.
Figure 7-6
Authenticating Directories
2 Enter a friendly name for the Directory Service and select eDirectory from the Service Type
drop-down list.
3 In the Host/DN field, specify the IP address of the eDirectory server and specify the tree name
under the Domain tree.
4
Check Available for User Authentication to display the domain in the login drop-down menu.