Novell PRIVILEGED USER MANAGER 2.2.1, Руководство по началу работы

Страница: 29 / 36

Installing the Agents 29
n
ov
do
cx (e
n)
16
Ap
ril 20
10
3 When installation is complete, check that the service is running by viewing the log file.
The log file is located in
/opt/novell/npum/logs/unifid.log
, if the default install location
was used. If the agent installed correctly, it should be listening on 0.0.0.0:29120.
4 Use the following command to register the agent with the Framework Manager. This command
must be issued from the machine where the agent is installed.
/opt/novell/npum/sbin/unifi regclnt register
Four items of information are required:
The registration server hostname: The hostname or IP address of the Framework Manager.
The registration server port: Accept the default unless another application is using this port.
After the host is registered, this port cannot be modified.
The name or IP address of this host: The DNS name or IP address by which any other agent
in the Framework can resolve the location of this machine on your network.
The name of this agent: The name of the agent when it was created in the Framework Console
(refer to “Creating a Host Name for Each Agent” on page 27 ).
NOTE: When the above details have been provided, a valid username and password for the
Framework Manager are required to complete the registration of the agent.
5
Verify that the registration has been successful by viewing the host details on the Framework
Console.
4.4.2 HP-UX Agent Install
The HP-UX installation package is compressed through gzip. In order to install the package, you
must unzip the package through gunzip.
By default, the installation program installs the software into
/opt/novell
. To change this, create a
directory in the required part of the file system and create a symbolic link to
/opt/novell
.
To install the HP-UX agent:
1 Copy the installation package to a temporary location and use the following command to
extract the installation files:
gunzip <filename>
See the “Novell Privileged User Manager Readme” (http://www.novell.com/documentation/
privilegedusermanager22/readme/privilegedusermanager_readme.html) for the actual
filename.
2 After the HP-UX installation package is uncompressed, use the following command to install
the agent:
swinstall -s /<directory of .depot file>/ <filename> .depot \*
3 After installation is complete, check that the service is running by viewing the log file.
The log file is located in
/opt/novell/npum/logs/unifid.log
, if the default install location
was used. If the agent installed correctly, it should be listening on 0.0.0.0:29120.
4
Use the following command to register the agent with the Framework Manager. This command
must be issued from the machine where the agent is installed.
/opt/novell/npum/sbin/unifi regclnt register