Novell PRIVILEGED USER MANAGER 2.2.1, Руководство по началу работы

Страница: 22 / 36

22 Novell Privileged User Manager 2.2.1 Getting Started Guide
n
ov
do
cx (e
n)
16
Ap
ril 20
10
To check the status:
/etc/init.d/npum status
Alternatively, you can use the following instructions for all distributions except SUSE
®
.
To stop the Framework process:
service npum stop
To start the Framework process:
service npum start
To check the status:
service npum status
3.5.4 Solaris
The following instructions apply to all supported distributions.
To stop the Framework process:
/etc/init.d/npum stop
To start the Framework process:
/etc/init.d/npum start
To check the status:
/etc/init.d/npum status
Solaris 10 also uses the SMF (Service Management facility). Example commands are:
svcs | grep npum
legacy_run Apr_21 lrc:/etc/rc3_d/S99npum
online Apr_21 svc:/application/security/npum:default
Then, to enable the Framework process:
svcadm enable npum
To disable the Framework process:
svcadm disable npum
To restart the Framework process:
svcadm restart npum
To clear the Framework process:
svcadm clear npum
Please refer to your Solaris documentation for full SMF instructions.