Novell PRIVILEGED USER MANAGER 2.2.1, Руководство по началу работы

Страница: 16 / 36

16 Novell Privileged User Manager 2.2.1 Getting Started Guide
n
ov
do
cx (e
n)
16
Ap
ril 20
10
2 After the AIX installation package is uncompressed, use one of the following methods to
perform the installation.
Š The AIX smitty program.
Š
The following command:
installp -acgNQqwX -d <directory of .bff file> novellnpum
3 After installation is complete, check that the service is running by viewing the log file. The log
file is located in
/opt/novell/npum/logs/unifid.log
, if the default install location was
used. If the manager installed correctly, services should be listening on 0.0.0.0:29120 and
0.0.0.0:443.
4 If you have been supplied with a license, log in to the Framework Console and install the
license.
For information, refer to
Section 3.2, “Accessing the Framework Console,” on page 19 , and
then Section 3.3, “Installing a Novell Privileged User Manager License,” on page 20 .
3.1.2 HP-UX Framework Manager Install
The HP-UX installation package is compressed through gzip. In order to install the package, you
must unzip the package through gunzip.
By default, the installation program installs the software into
/opt/novell/npum
. To change this,
create a directory in the required part of the file system and create a symbolic link to
/opt/novell/
npum
.
To install the HP-UX manager:
1 Copy the installation package to a temporary location and use the following command to
extract the installation files:
gunzip <filename>
See the “Novell Privileged User Manager Readme” (http://www.novell.com/documentation/
privilegedusermanager22/readme/privilegedusermanager_readme.html) for the actual
filename.
2 After the HP-UX installation package is uncompressed, use the following command to install
the manager:
swinstall -s /<directory of .depot file>/<filename>.depot \*
3 After installation is complete, check that the service is running by viewing the log file. The log
file is located in
/opt/novell/npum/logs/unifid.log,
if the default install location was
used. If the manager installed correctly, services should be listening on 0.0.0.0:29120 and
0.0.0.0:443.
4
If you have been supplied with a license, log in to the Framework Console and install the
license.
For information, refer to
Section 3.2, “Accessing the Framework Console,” on page 19 , and
then Section 3.3, “Installing a Novell Privileged User Manager License,” on page 20 .
3.1.3 Linux Framework Manager Install
Linux hosts use the RPM packaging system for installation, upgrade, and removal.