Novell OPEN ENTERPRISE SERVER 2 SP2 - ADMINISTRATION, Руководство по внедрению, Страница: 255 / 288

OES 2 Service Scripts 255
n
ov
do
cx (e
n)
22
Ju
n
e 20
09
Novell Remote Manager novell-httpstkd This script runs by default on every OES 2
server and enables access to NRM for
Linux through a browser.
Use this script followed by the status option
to view current status. Or use stop, start, or
restart options to alter the run state of the
NRM daemon as needed.
Novell Storage Services
TM
novell-nss This script runs by default on every OES 2
server with NSS volumes and enables
access to the NSS runtime environment.
To see if the NSS kernel modules and NSS
admin volume are running, enter
service
novell-nss status , /etc/init.d/
novell-nss status
, or
rcnovell-nss
status at a command prompt. If they are
not running, use the
start
option to start
them. You cannot stop NSS.
Novell Remote Manager e-mail
notifications postfix Novell Remote Manager uses this to send
notifications as configured.
NTP ntp This is the SLES 10 Network Time Protocol
daemon.
OpenWBEM CIMOM
owcimomd
This is used to start the OpenWBEM
CIMOM daemon, which is an integral part
of the iManager plug-ins for LUM, Samba,
NSS, SMS, and NCS. iPrint and NRM also
use OpenWBEM.
Novell Remote Manager on OES 2 gets its
server health information from CIMOM.
Patching novell-zmd This is the GUI patch updater daemon.
Red Carpet
®
rcd This is the rug command line daemon.
Samba nmb This is the Samba NetBIOS naming
daemon.
Samba CIFS support smb This script runs the Samba daemon.
SLP support slpd This lets you start and stop OpenSLP,
which is a key component for eDirectory
and certain other services and clients.
Storage Management Services TM novell-smdrd This lets you start and stop the SMDR
daemon precess. It also loads and unloads
the NSS zapi kernel module used by SMS
to back up the NSS volumes.
Tomcat novell-tomcat5 This script sets up the SLES 10 Tomcat
specifically for OES 2 services, such as the
Welcome pages.
Services Associated with Scripts Script Name Notes