Novell OPEN ENTERPRISE SERVER 2 SP2 - ADMINISTRATION, Руководство по внедрению, Страница: 161 / 288

Users and Groups 161
n
ov
do
cx (e
n)
22
Ju
n
e 20
09
should begin copying from the first dash (-) of the credential (----BEGIN PRODUCT
ACTIVATION CREDENTIAL) through the last dash (-) of the credential (END
PRODUCT ACTIVATION CREDENTIAL-----).
4 Open iManager.
5 Choose Identity Manager > Identity Manager Overview .
6 Select the driver set or browse to a driver set, then click Next .
7 On the Identity Manager Overview page, locate the driver set, click the red Activation required
by link, then click Install Activation .
8 Select the driver set where you want to activate an Identity Manager component.
9 Do one of the following:
Š
Specify where you saved the Identity Manager Activation Credential, then click Next .
or
Š
Paste the contents of the Identity Manager Activation Credential into the text area, then
click
Next .
10 Click Finish .
Frequently Asked Questions about Activation
Do I need to Install Identity Manager on a specific server?
Yes. As a Bundle Edition user, you must install Identity Manager on the server where you installed
Open Enterprise Server. In order for activation to work properly, you must install Identity Manager
on Linux or NetWare, and create a driver set on that server.
I installed the Bundle Edition on Linux or NetWare, but it’s not activated. Why is this?
You must install the Bundle Edition on the server where OES exists. If you install it on a non-OES
server, the Bundle Edition cannot activate.
Can I run Identity Manager on a Windows Server?
Not with the Bundle Edition. However, you can still synchronize data held on a Windows server by
using the Identity Manager Remote Loader service. The Remote Loader enables synchronization
between the DirXML Engine (on your Linux or NetWare server) and a remote driver (on the
Windows server.) See
Setting Up a Connected System (http://www.novell.com/documentation/
idm35/admin/data/bs35odr.html) for more information.
In order to run Identity Manager on a Windows server, you need to purchase Novell Identity
Manager .
Can I run Identity Manager on a Solaris or AIX Server?
Not with the Bundle Edition. However, you can still synchronize data held on these platforms by
using the Identity Manager Remote Loader service. The Remote Loader enables synchronization
between the Metadirectory Engine and a remote driver (on the Solaris or AIX server.) See
Setting
Up a Connected System (http://www.novell.com/documentation/idm35/admin/data/bs35odr.html)
for more information.
In order to run Identity Manager on Solaris or AIX, you need to purchase Novell Identity Manager .