Novell OPEN ENTERPRISE SERVER 2 SP2 - ADMINISTRATION, Руководство по внедрению, Страница: 121 / 288

Network Services 121
n
ov
do
cx (e
n)
22
Ju
n
e 20
09
9 If you did this after installing OES 2, enter the following name to verify that the tree is found:
slptool findsrvs service:ndap.novell
Checking the Status of Novell SLP Services
There are several ways to check the status of Novell SLP services.
Š
If you know the IP addresses of the DAs, check the
SYS:\etc\slp.cfg
file on non-DA
servers to see if the DA IP addresses are listed.
Š If you know the scope names, check for the proper scope name configuration by using the
SET
SLP SCOPE LIST
command.
Š
Use the
DISPLAY SLP SERVICES
command to list all of the services that are registered in all of
the scopes that the server is configured to use.
Š
Use iManager to open the scope container object to see all of the registered services.
Š If you are registering different services in different scopes, look in the
SYS:\etc\slp.cfg
file
for
REGISTER TYPE
lines.
Š
At the DOS prompt on a Windows workstation with Client32
TM
installed, use the
SLPINFO /
ALL
command.