Novell LINUX ENTERPRISE SERVER 11 - STORAGE ADMINISTRATION GUIDE 2-23-2010 Скачать руководство пользователя страница 6

Страница: 6 / 140

SLES 11: Storage Administration Guide

ocx

7 Ja
nua
ry 201

5 Resizing File Systems

5.1

Guidelines for Resizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.1.1

File Systems that Support Resizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

5.1.2

Increasing the Size of a File System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

5.1.3

Decreasing the Size of a File System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

5.2

Increasing an Ext2 or Ext3 File System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

5.3

Increasing the Size of a Reiser File System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.4

Decreasing the Size of an Ext2 or Ext3 File System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.5

Decreasing the Size of a Reiser File System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

6 Using UUIDs to Mount Devices

6.1

Naming Devices with udev. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

6.2

Understanding UUIDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
6.2.1

Using UUIDs to Assemble or Activate File System Devices . . . . . . . . . . . . . . . . . . . 40

6.2.2

Finding the UUID for a File System Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

6.3

Using UUIDs in the Boot Loader and /etc/fstab File (x86) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

6.4

Using UUIDs in the Boot Loader and /etc/fstab File (IA64) . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

6.5

Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

7 Managing Multipath I/O for Devices

7.1

Understanding Multipathing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
7.1.1

What Is Multipathing? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

7.1.2

Benefits of Multipathing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

7.2

Planning for Multipathing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
7.2.1

Guidelines for Multipathing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

7.2.2

Using Multipathed Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

7.2.3

Using LVM2 on Multipath Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

7.2.4

Using mdadm with Multipath Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

7.2.5

Using --noflush with Multipath Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

7.2.6

Partitioning Multipath Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

7.2.7

Supported Architectures for Multipath I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

7.2.8

Supported Storage Arrays for Multipathing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

7.3

Multipath Management Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
7.3.1

Device Mapper Multipath Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

7.3.2

Multipath I/O Management Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

7.3.3

Using mdadm for Multipathed Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

7.3.4

The Linux multipath(8) Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

7.4

Configuring the System for Multipathing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
7.4.1

Preparing SAN Devices for Multipathing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

7.4.2

Partitioning Multipathed Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

7.4.3

Configuring the Server for Multipathing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

7.4.4

Adding multipathd to the Boot Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

7.4.5

Creating and Configuring the /etc/multipath.conf File . . . . . . . . . . . . . . . . . . . . . . . . 56

7.5

Enabling and Starting Multipath I/O Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

7.6

Configuring Path Failover Policies and Priorities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
7.6.1

Configuring the Path Failover Policies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

7.6.2

Configuring Failover Priorities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

7.6.3

Using a Script to Set Path Priorities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

7.6.4

Configuring ALUA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

7.6.5

Reporting Target Path Groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

7.7

Tuning the Failover for Specific Host Bus Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

7.8

Configuring Multipath I/O for the Root Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

7.9

Configuring Multipath I/O for an Existing Software RAID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Содержание LINUX ENTERPRISE SERVER 11 - STORAGE ADMINISTRATION GUIDE 2-23-2010













































































































































Результаты поиска

Содержание LINUX ENTERPRISE SERVER 11 - STORAGE ADMINISTRATION GUIDE 2-23-2010

Отзывы:

Novell LINUX ENTERPRISE SERVER 11 - STORAGE ADMINISTRATION GUIDE 2-23-2010, Руководство администратора, Страница: 6 / 140

Результаты поиска

Содержание LINUX ENTERPRISE SERVER 11 - STORAGE ADMINISTRATION GUIDE 2-23-2010

Отзывы: