Novell LINUX ENTERPRISE SERVER 11 - STORAGE ADMINISTRATION GUIDE 2-23-2010 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 140

Novell LINUX ENTERPRISE SERVER 11 - STORAGE ADMINISTRATION GUIDE 2-23-2010 Скачать руководство пользователя страница 21

What’s New

2

21

no

vd

ocx

(e

n)

7 Ja
nua
ry 201

0

2

What’s New

The features and behavior changes noted in this section were made for the SUSE

®

Linux Enterprise

Server 11 release.

Section 2.1, “EVMS2 Is Deprecated,” on page 21

Section 2.2, “Ext3 as the Default File System,” on page 21

Section 2.3, “JFS File System Is Deprecated,” on page 21

Section 2.4, “OCFS2 File System Is in the High Availability Release,” on page 22

Section 2.5, “/dev/disk/by-name Is Deprecated,” on page 22

Section 2.6, “Device Name Persistence in the /dev/disk/by-id Directory,” on page 22

Section 2.7, “Filters for Multipathed Devices,” on page 22

Section 2.8, “User-Friendly Names for Multipathed Devices,” on page 23

Section 2.9, “Advanced I/O Load-Balancing Options for Multipath,” on page 23

Section 2.10, “Location Change for Multipath Tool Callouts,” on page 23

Section 2.11, “Change from mpath to multipath for mkinitrd -f Option,” on page 23

2.1 EVMS2 Is Deprecated

The Enterprise Volume Management Systems (EVMS2) storage management solution is deprecated.
All EVMS management modules have been removed from the SUSE Linux Enterprise Server 11
packages. Your EVMS-managed devices should be automatically recognized and managed by Linux
Volume Manager 2 (LVM2) when you upgrade your system. For more information, see

Evolution of

Storage and Volume Management in SUSE Linux Enterprise

(http://www.novell.com/linux/

volumemanagement/strategy.html)

.

For information about managing storage with EVMS2 on SUSE Linux Enterprise Server 10, see the

SUSE Linux Enterprise Server 10 SP3: Storage Administration Guide

(http://www.novell.com/

documentation/sles10/stor_admin/data/bookinfo.html)

.

2.2 Ext3 as the Default File System

The Ext3 file system has replaced ReiserFS as the default file system recommended by the YaST
tools at installation time and when you create file systems. ReiserFS is still supported. For more
information, see

File System Future Directions

(http://www.novell.com/linux/techspecs.html?tab=0)

on the

SUSE Linux Enterprise 10 File System Support

Web page.

2.3 JFS File System Is Deprecated

The JFS file system is no longer supported. The JFS utilities were removed from the distribution.

«
...
19
20
21
22
23
...
»

Содержание LINUX ENTERPRISE SERVER 11 - STORAGE ADMINISTRATION GUIDE 2-23-2010













































































































































Отзывы:

Нет отзывов