Novell IFOLDER 3.6 - CROSS-PLATFORM, Руководство пользователя

Страница: 78 / 119

78 OES 2: Novell iFolder 3.6 Cross-Platform User Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
The iFolder appears in the iFolders on This Computer list.
8 If the
iFolder Created
message appears, do one of the following:
Š
Click Close to dismiss the message.
Š
Select Do not show this message again to disable future notifications, then click Close to
dismiss the message.
If you later decide that you want to get confirmation messages, go to iFolder Preferences ,
select Show Confirmation Dialog When Creating iFolders , then click OK .
Creating iFolders in a File Manager
1 Use the file manager to navigate to the folder you want to convert to an iFolder, then select the
folder.
2 Use one of the following methods:
Š Right-click the folder icon, then click Convert to an iFolder.
Š
On the toolbar, click File > Convert to an iFolder .
The folder icon Description: iFolder Icon changes to a folder with an overlay of the iFolder
emblem (green “i”) .
3 If the
iFolder Created
message appears, do one of the following:
Š Click Close to dismiss the message.
Š
Select Do Not Show This Message Again to disable future notifications, then click Close
to dismiss the message.
If you later decide that you want to get confirmation messages, go to iFolder Preferences,
select
Show Confirmation Dialog When Creating iFolders , then click OK .
7.5.3 Creating iFolders on a FAT32 Mount Point (Linux)
On Linux, iFolder supports creating and using iFolders on a mount point for a FAT32 file system.
Before you can create new iFolders or set up shared iFolders on a FAT32 volume on your Linux
computer, the iFolder user must own the FAT32 mount point where you want to store the iFolders,
and the
/etc/fstab
file must explicitly identify the iFolder user’s local user ID for the mount
point.
IMPORTANT: This is required because FAT32 does not support file permissions. Any other file
system that does not support permissions has the same issue.