Novell IDENTITY MANAGER 3.6.1, Руководство по установке

Страница: 79 / 104

Performing an In-place Upgrade 79
no
vd
ocx
(e
n)
17
Sep
te
m
be
r 20
09
13.1 Creating a Backup of the Current
Configuration
Before upgrading, it is important to create a backup of the current configuration of your Identity
Manager system. There are no additional steps required if you are using the User Application. All
User Application configuration is stored in the User Application driver. There are two ways to create
a backup:
Š Section 13.1.1, “Ensuring that Your Designer Project is Current,” on page 79
Š
Section 13.1.2, “Creating an Export of the Drivers,” on page 80
13.1.1 Ensuring that Your Designer Project is Current
A Designer project contains the schema and all driver configuration information. Creating a project
of your Identity Manager solution allows you to create an export of all of the driver in one step
instead of creating a separate export file for each driver.
Š
“Exporting the Current Project” on page 79
Š “Creating a New Project from the Identity Vault” on page 79
Exporting the Current Project
If you already have a Designer project, verify that the information in the project is synchronized
with what is in the Identity Vault:
1 In Designer, open your project.
2 In the Modeler, right-click the Identity Vault, then select Live > Compare .
3 Evaluate the project and reconcile any differences, then click OK .
For more information, see “ Using the Compare Feature When Deploying ” in Designer 3.5 for
Identity Manager 3.6 Administration Guide .
4
On the toolbar, select Project > Export .
5 Click Select All to select all resources to export.
6 Select where to save the project and in what format, then click Finish .
Save the project in any location, except for the current workspace. When you upgrade to
Designer 3.5, you must create a new workspace location. For more information, see “
Exporting
a Project ” in Designer 3.5 for Identity Manager 3.6 Administration Guide .
Creating a New Project from the Identity Vault
If you don't have a Designer project of your Identity Manager solution, use the following procedure:
1 Download and install Designer 3.5.
You can create a Identity Manager 3.6.x project with Designer 3.5. For more information, see
Section 7.1, “Installing Designer,” on page 55 .
2 Launch Designer, then specify a location for your workspace.
3 Select whether you want to check for online updates, then click OK .
4 On the Welcome page, click Run Designer .