668
GroupWise 7 Administration Guide
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
Section 42.6.2, “Copying and Compiling the MTA MIB File,” on page 670
Section 42.6.3, “Configuring the MTA for SNMP Monitoring,” on page 671
42.6.1 Setting Up SNMP Services for the MTA
Select the instructions for the platform where the MTA runs:
“Setting Up SNMP Services for the NetWare MTA” on page 668
“Setting Up SNMP Services for the Linux MTA” on page 668
“Setting Up SNMP Services for the Windows MTA” on page 669
Setting Up SNMP Services for the NetWare MTA
The NetWare MTA supports SNMP through the SNMP services loaded on the NetWare server.
SNMP services are provided through the SNMP NLM
TM
. The SNMP NLM initiates and responds to
requests for monitoring information and generates trap messages.
If the SNMP NLM is not loaded before the NetWare MTA, the MTA still loads and functions
normally, but SNMP support is disabled. The MTA does not attempt to auto-load snmp.nlm.
To load the SNMP NLM manually:
1
Go to the console of each NetWare server where you want to implement SNMP services.
These servers should already have the GroupWise agents installed.
2
Type the command to load the SNMP NLM:
Syntax
load snmp v control=
x
monitor=
y
trap=
z
where
v
represents Verbose, meaning to display informational messages, and
x
,
y
and
z
are
replaced with your system SNMP community strings for SNMP SETs, GETs and TRAPs).
Example:
load snmp v control=private monitor=public trap=all
The configuration for the SNMP NLM is found in snmp.cfg and traptarg.cfg in the sys:\etc
directory. View the contents of these files for more information.
The TCP/IP NLM automatically loads snmp.nlm, using default values for the community
strings. If your system uses different community string values, load snmp.nlm before tcpip.nlm.
3
If the SNMP NLM is already loaded, you can add the control and trap parameters by typing the
following at the console prompt:
snmp control= trap=
To automatically load these commands, include them in the autoexec.ncf file.
For more information about implementing SNMP services, see your NetWare documentation.
4
Skip to
Section 42.6.2, “Copying and Compiling the MTA MIB File,” on page 670
.
Setting Up SNMP Services for the Linux MTA
The Linux MTA is compatible with NET-SNMP. An older version of SNMP called UCD-SNMP
cannot be used with the Linux MTA. NET-SNMP comes standard with OES Linux, but it does not
Содержание GROUPWISE 7 - MESSAGE TRANSFERT AGENT
Страница 2: ...604 GroupWise 7 Administration Guide novdocx en 11 December 2007...
Страница 10: ...612 GroupWise 7 Administration Guide novdocx en 11 December 2007...
Страница 72: ...674 GroupWise 7 Administration Guide novdocx en 11 December 2007...
Страница 80: ...682 GroupWise 7 Administration Guide novdocx en 11 December 2007...
