Novell GROUPWISE 7 - MESSAGE TRANSFERT AGENT, Руководство пользователя

Страница: 36 / 97

638 GroupWise 7 Administration Guide
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
6 Verify that the information displayed in the Edit Domain Link dialog box is correct.
7 Click Transfer Pull Info .
8 Specify the full path to the transfer directory you created.
You can use a UNC path for the NetWare and Windows MTA; you can use a mapped drive path
for the Windows MTA only.
9 Specify the number of seconds after which the MTA checks the transfer directory for message
files to pull.
10 Specify the command needed to reestablish the connection with the transfer directory, if that
connection should be broken for any reason.
11 Click OK until you return to the Link Configuration dialog box.
12 Click File > Exit > Yes to save the link changes for the receiving domain and return to the main
ConsoleOne window.
13 Stop and restart the MTAs for both domains.
41.4 Configuring Domain Maintenance
You can configure the MTA to synchronize user information in the GroupWise Address Book with
user information in eDirectory. You can also configure it to gather information about all messages
that pass through the domain for tracking purposes.
Š
Section 41.4.1, “Using eDirectory User Synchronization,” on page 638
Š
Section 41.4.2, “Enabling MTA Message Logging,” on page 643
41.4.1 Using eDirectory User Synchronization
As long as GroupWise administration is performed with the GroupWise Administrator snap-in to
ConsoleOne running, user information is automatically synchronized between GroupWise and
eDirectory. However, four situations can cause this automatic synchronization to be insufficient:
Š
An administrator modifies user information in ConsoleOne without having the GroupWise
Administrator snap-in running.
Š
The user information was changed using NetWare
®
Administrator without the GroupWise
Administrator snap-in running.
Š
The user information was changed using Novell iManager.
Š
The user information was changed using Novell eGuide and the GroupWise Identity Manager
driver is not in use
In these situations, user information in eDirectory no longer matches corresponding user
information in GroupWise. (User objects are the only GroupWise objects that can be modified
without the GroupWise Administrator snap-in running. Modification of all other GroupWise objects
requires the presence of the GroupWise Administrator snap-in.)
This section covers the following aspects of eDirectory user synchronization:
Š “Enabling eDirectory User Synchronization” on page 639
Š
“Assigning an eDirectory-Enabled MTA to Synchronize Other Domains” on page 641
Š
“Scheduling eDirectory User Synchronization” on page 642