Novell BUSINESS CONTINUITY CLUSTERING 1.2.1 - ADMINISTRATION, Руководство администратора

Страница: 55 / 184

Installing Business Continuity Clustering 55
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
yast2 bcc_autoconfig path_to_XML_profile
Replace path_to_XML_profile with the path to the file you created in Step 1 on page 53 .
6 Remove the installation source you created in Step 1 above by completing the following steps:
6a
Open a shell and run
yast2 inst_source
.
6b Select the Business Continuity Clustering installation source, click Delete , then click
Finish .
4.5.4 Removing the NFS Share from Your Server
You can optionally remove the Business Continuity Clustering installation directory as an NFS
share. After a successful install, it is needed only if you re-install or uninstall BCC.
1 Open a shell and run
yast2 nfs_server
2
Select Start Server , then click Next .
3 Select the Business Continuity Clustering installation directory, click Delete , then click Finish .
4.5.5 Cleaning Up the Business Continuity Clustering
Installation Source
Clean up the Business Continuity Clustering installation source by opening a terminal console and
running one of the commands below, depending on which method you chose in
Step 1 on page 54 .
rm -rf /tmp/bcc_install
or
umount /mnt/iso
4.6 What’s Next
After you have installed BCC on every node in each cluster that you want to be in the business
continuity cluster, continue with the following steps:
Š Chapter 9, “Configuring the Identity Manager Drivers for BCC,” on page 71
Š
If you are adding a new cluster to an existing business continuity cluster, follow the instructions
in
“Synchronizing Identity Manager Drivers” on page 81 to synchronize the BCC Identity
Manager drivers across all the clusters.
Š
Chapter 10, “Configuring BCC for Peer Clusters,” on page 85
Š Chapter 12, “Configuring BCC for Cluster Resources,” on page 103