Novatron Xsite EASY, Руководство пользователя

Страница: 20 / 55

3.2 Measurement mode
Screen views with different measurement symbols can be changed using the up and down arrow
keys. “0.0” in the picture indicates the point where the bucket has been zeroed. Figure 8 shows
four of the most commonly used measuring symbol functions. Table 3 lists all the symbols.
Table 3. Measurement symbol explanations
Depth
Height from the zero point to the bucket measuring point
Distance
Horizontal distance from the zero point to the bucket measuring point
Slope
Height from the target surface to the bucket measuring point
Laser jobsite height
Height of the bucket measuring point compared to laser jobsite height
Jobsite target height (with laser)
When laser is used the reading is zero at target height
Bucket figure side view
Illustration of the bucket angle viewed from side
Xsite EASY | User manual | Page 17 of 52
Figure 8. Basic measurement symbol functions