12
AUtoMAP tEMPLAtE oVERVIEW
When in Automap Mode (Led On), a unique template is used. This template is separate from the built in 32 templates
in advanced mode. All highlighted hardware controls displayed in the image below are available for controlling software
parameters via Automap.
The following controls can be assigned to either the Automap Port or to the Control port.
Control pedal
•
Expression pedal
•
Drum pads
•
When switched out, they are routed to USB Port 1 and send standard MIDI messages. When switched in, they are
routed to the Automap client and therefore are not sending standard MIDI messages.
Page Up / Down
buttons - scroll through pages of an Automap mapping.
Hold
Preview
button and press
Page Up / Down
buttons - scroll through presets of an Automap plug-in. Preset
navigation will only work where a plug-in uses the host preset navigation system, rather than it’s own built-in one.
Hold
Preview
and touch or press any assignable control
to display that row’s controls on the ZeRO SL MkII’s LCD screen.
For example, by holding the
Preview
button and touching the third vertical fader, the parameter names and values
assigned to all eight faders are displayed on the LCD.
SPEED DIAL
The
speed dial
knob has 2 functions in Automap Mode.
Speed Dial mode:
The
speed dial
can be used to control any on-screen parameter that can be altered using the mouse.
Simply move the mouse cursor over the parameter you want to change then rotate the knob to control it.
This process can be used for e.g. altering parameters on a soft-synth, controlling mixer parameters in your sequencer,
selecting an option from a drop-down menu or resizing a window. The Automap Server software must be running for
this function to work.
Preset mode:
Press and rotate the knob whilst held down to select different plug-in presets. Preset navigation will only
work where a plug-in uses the host preset navigation system, rather than it’s own built-in one.
Expression
Control
