Volume - Rotary
This knob adjusts the overall output volume of the DrumStation on both the Main L/R and
Headphone outputs. The volume of a drum sound can be set individually using the ‘Level’
controls in each section.
NOTE: This control can be overidden by MIDI Volume data. If a MIDI Volume of ‘0’ has
been received by the DrumStation, no output will be heard regardless of the position of this
knob. To reset the volume either transmit the relevant MIDI Volume level or move the
Volume knob - this automatically overides the MIDI setting.
Drum Kit - Buttons
Here you select which drum kit (TR808 or TR909) will be edited when using the front panel
controls or any of the Utility functions. Each ‘Progam’ has TR808 & TR909 sounds - see
‘Function 5 - General MIDI Setup’ on page 36.
Write - Switch
This switch protects your programs from accidental erasure. During normal operation it should be left in it’s ‘Protect’ position
however, when you have edited or created a new program that you want to save, moving it to the ‘Enable’ position will allow
you to “write” over an existing program - see “Writing a Program Into Memory” on page 13.
Headphone - Socket
Use this 1/4 jack socket to monitor the output of your DrumStation Rack via headphones. This output will drive any type of
headphones.
Master Volume
Section
7
ENABLE
PROTECT
WRITE
HEADPHONES
DRUM KIT
VOLUME
0
10
808
909