Novatel SA 1100, Руководство пользователя

Страница: 19 / 25

16
l
The transmitter antennas used with the SA 1100 must not exceed the following levels:
o
CDMA BC0/GSM850/WCDMA Band 5: the maximum gain is 1.0dBi.
o
CDMA BC1/GSM1900/WCDMA Band 2: the maximum gain is 2.0dBi.
o
Z-Wave 900MHz: the maximum gain is 0.0dBi.
l
Only antennas of the same type and with equal or less gains as shown below may be used with this
WLAN device. Other types of antennas and/or higher gain antennas may require additional testing
and/or authorization for operation.
o
WLAN 2.4GHz: the maximum gain is 3.62dBi.
o
PIFA Antenna Type for 802.11b/g/n.
l
To comply with the aspects of KDB 996369, strict adherence to the design parameters in the
Section Antenna and RF Signal Trace must be observed. This Section provides PCB RF trace
design guidelines for the coplanar micro strip between the transmitters RF compression pads and
the SMA coaxial connector.
A label containing the SA 1100 FCC ID and Industry Canada certification number must be permanently
affixed to the exterior of the host device into which the SA 1100 transmitter is installed. The label may
also be in a user accessible location such as under a panel or battery pack if it is a handheld device, readily
accessible, not placed on a removable part and the FCC ID and Industry Canada certification number are
visible at the time of purchase. The label must contain a statement similar to the following
o
When Using Models SA1100-00-AT, SA1100-20-AT, SA1100-30-AT:
• This device contains FCC ID: PKRNVWSA1100
• This device contains IC: 3229A-SA1100
o
When Using Models SA1100-00-VZ, SA1100-20-VZ, SA1100-30-VZ:
• This device contains FCC ID: PKRNVWSA1100V
• This device contains IC: 3229A-SA1100V
If the SA 1100 certified transmitter is intended for use in a portable use device, the OEM integrator is
responsible to design the product to comply with RF exposure requirements, and must work with
Novatel Wireless (the grantee) to satisfy FCC/IC SAR requirements. Refer to Industry Canada RSS-102
and FCC KDB publication 447498 D01 and the applicable SAR/RF Exposure KDB publications
available at: https://apps.fcc.gov/oetcf/kdb/reports/GuidedPublicationList.cfm .
1
1
Mobile Device Definition – FCC defines as a transmitting antenna located at a distance ≥ 20cm from
the user.
2
Standalone is defined as a single transmitter transmitting as opposed to 2 or more transmitters
transmitting simultaneously.